The DS9098P iButton retainer is a low-cost, surface-mount device to secure an F5 iButton on a PCB. It consists of three metal pieces (two for ground, one for data) molded into a body of black, heat-stabilized, glass fiber reinforced liquid crystal polymer. When inserting an iButton into the DS9098P, closely align axis of the iButton and the retainer. The retainer then latches the flange of the iButton. At removal, limit deflection of retainer latches to just free the iButton edge from retained state. Avoid applying excess force to latches.

The DS9098P is only available on tape and reel. The tape specifications match those of 68-lead PLCC devices except for the deeper pockets and tape-feed sprockets on either side of the 44mm tape. Alignment pedestals keep the part oriented on tape with the latches adjacent to the sprockets.

• MAX11620 - 10位、300ksps ADC，带有FIFO和内部基准
• MAX2027 - IF数控可变增益放大器
• MAX699 - 低成本、上电复位与看门狗控制器
• MAX533 - 2.7V、低功耗、8位四路DAC，带有满摆幅输出缓冲器
• MAX6373 - 引脚可设置看门狗定时器
• MAX1806 - 500mA、低电压、线性稳压器，µMAX封装
• MAX1838 - 双路USB开关，带有故障屏蔽及自复位功能
• MAX6922 - 27/28/32路输出、76V、串行接口VFD管驱动器
• MAX6893 - 引脚可设置八/六/四路电源排序器/监控器
• ICM7225 - 4 1/2位、LCD、高速计数器及解码驱动器