The MAX1091/MAX1093 low-power, 10-bit analog-to-digital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. They operate with a single +3V analog supply and feature a VLOGIC pin that allows them to interface directly with a +1.8V to +3.6V digital supply.

Power consumption is only 5.7mW (VDD = VLOGIC) at the maximum sampling rate of 250ksps. Two software-selectable power-down modes enable the MAX1091/MAX1093 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates.

Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1091 has eight input channels and the MAX1093 has four input channels (four and two input channels, respectively, when in pseudo-differential mode).

Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements.

The MAX1091/MAX1093 tri-states active-low INT when active-low CS goes high. Refer to MAX1061/MAX1063 if tri-stating active-low INT is not desired.

The MAX1091 is available in a 28-pin QSOP package, while the MAX1093 is available in a 24-pin QSOP. For pin-compatible +5V, 10-bit versions, refer to the MAX1090/MAX1092 data sheet.

• MAX78700 - 多通道、隔离、高精度ADC
• MAX16993 - 降压控制器，带有2路2.1MHz降压DC-DC转换器
• MAX4205 - 超高速、低噪声、低功耗、SOT23封装的开环缓冲器
• MAX6357 - 双/三电压微处理器监控电路
• MAX6711L|MAX6711M|MAX6711R|MAX6711S|MAX6711T|MAX6711Z - 4引脚、SC70微处理器复位电路，带有手动复位输入
• MAX14850 - 六通道数字隔离器
• MAX1078 - 1.8Msps、单电源、低功耗、真差分、10位ADC，内置电压基准
• MAX8745A - 高效率、四路输出、主电源控制器，用于笔记本电脑
• MAX8620Y - µPMIC，用于便携式设备中的微处理器或DSP
• DS1091L - 工作在汽车级温度范围的扩频EconOscillator