The MAX114/MAX118 are microprocessor-compatible, 8-bit, 4-channel and 8-channel analog-to-digital converters (ADCs). They operate from a single +5V supply and use a half-flash technique to achieve a 660ns conversion time (1Msps). A power-down (active-low PWRDN) pin reduces current consumption typically to 1µA. The devices return from power-down mode to normal operating mode in less than 200ns, allowing large supply-current reductions in Burst Mode® applications (in Burst Mode, the ADC wakes up from a low-power state at specified intervals to sample the analog input signals). Both converters include a track/hold, enabling the ADC to digitize fast analog signals.

Microprocessor (µP) interfaces are simplified because the ADC can appear as a memory location or I/O port without external interface logic. The data outputs use latched, three-state buffer circuitry for direct connection to an 8-bit parallel µP data bus or system input port. The MAX114/MAX118 input/reference configuration enables ratiometric operation.

The 4-channel MAX114 is available in a 24-pin DIP or SSOP. The 8-channel MAX118 is available in a 28-pin DIP or SSOP. For +3V applications, refer to the MAX113/MAX117 data sheet.

• MAX12529 - 双路、96Msps、12位、IF/基带ADC
• MAX5130 - +3V/+5V、13位、串行、电压输出DAC，内置电压基准
• MAX2056 - 800MHz至1000MHz可变增益放大器，具有模拟增益控制
• MAX379 - 8通道、高电压、故障保护多路复用器
• MAX6440 - 低功耗、单/双电位电平监测器，带有滞回和集成微处理器复位电路
• MAX1983 - 低电压、低压差线性稳压器，外部偏置电源
• MAX692A - 微处理器监控电路
• MAX11156 - 18位、500ksps、内置基准的±5V SAR ADC，采用TDFN封装
• MAX1637 - 微型、低电压、高精度降压型控制器
• MAX9937 - 汽车检流放大器，提供电池反向保护