The MAX1291/MAX1293 low-power, 12-bit analog-to-digital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. They operate with a single +3V analog supply and feature a VLOGIC pin that allows them to interface directly with a +1.8V to +5.5V digital supply.

Power consumption is only 5.7mW (VDD = VLOGIC) at the maximum sampling rate of 250ksps. Two software-selectable power-down modes enable the MAX1291/MAX1293 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates.

Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1291 has eight input channels and the MAX1293 has four input channels (four and two input channels, respectively, when in pseudo-differential mode).

Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements.

The MAX1291/MAX1293 tri-states active-low INT when active-low CS goes high. Refer to MAX1261/MAX1263 if tri-stating active-low INT is not desired.

The MAX1291 is available in a 28-pin QSOP package, while the MAX1293 is available in a 24-pin QSOP. For pin-compatible +5V, 12-bit versions, refer to the MAX1290/MAX1292 data sheet.

• MAX2206 - RF功率检测器，UCSP封装
• MAX6515 - 低成本、2.7V至5.5V、温度开关，SOT23封装
• MAX3272EVKIT - MAX3272评估板
• MAX274|MAX274EVKIT - 四阶及八阶、连续时间方式有源滤波器
• MAX2903 - 200mW、单片发送器IC，用于868MHz/915MHz ISM频段
• MAX6779 - 低功耗、精度达1%的电池监测器，提供µDFN和SC70封装
• MAX11338 - 500ksps、12/10位、4/8/16通道ADC，提供外部信号调理复用输入
• MAX4598 - 低电压、组合了单端8选1或差分4选1的多路复用器
• MAX1996A - 高效率、宽亮度范围、CCFL背光控制器
• MAX2981 - 集成电力线通信模拟前端收发器和线驱动器