

- DS1345WP-100IND+ - 集成电路(IC) > 存储器 > 存储器
- MAX3386EEUP+ - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX6126B25+T - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- MAX16952AUE/V+T - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- MAX20337ENT+T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX17613AEVKIT# - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- MAX5874EGK+D - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- MAX4102ESA+ - 集成电路(IC) > 线性 > 放大器 > 视频放大器和模块
- MAX485ECSA+ - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX231EWE+ - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX4245AUT-T - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MAX8630ZETD25+T - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- MAX4532EAP+ - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX1455AUE+T - 集成电路(IC) > 接口 > 传感器和检测器接口
- ICL7612ACSA - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MAX875AESA+T - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- DS1010S-250 - 集成电路(IC) > 时钟/定时 > 延迟线
- MAX13485EELA+T - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX324ESA+T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX188AEPP+ - 集成电路(IC) > 数据采集 > ADC/DAC - 特殊用途



MAX1400 - +5V、18位、低功耗、多通道、过采样(Σ-Δ) ADC
MAX1400是Maxim美信半导体公司的一款数据转换器和采样-保持电路产品,MAX1400是+5V、18位、低功耗、多通道、过采样(Σ-Δ) ADC,本站介绍了MAX1400的封装应用图解、特点和优点、功能等,并给出了与MAX1400相关的Maxim元器件型号供参考。
MAX1400 - +5V、18位、低功耗、多通道、过采样(Σ-Δ) ADC - 数据转换器和采样-保持电路 - +5V工作,具有最高线性度的18位Σ-Δ - 美信半导体
The MAX1400 18-bit, low-power, multichannel, serial-output ADC uses a sigma-delta modulator with a digital decimation filter to achieve true 16-bit accuracy. The user-selectable decimation factor of the digital filter allows the conversion resolution to be reduced in exchange for a higher output data rate. The device achieves true 16-bit performance at an output data rate of up to 480sps. In addition, the modulator sampling frequency may be optimized for either lowest power dissipation or highest throughput rate. The MAX1400 operates from +5V.
This device offers three fully differential input channels that can be independently programmed with a gain between +1V/V and +128V/V. Furthermore, it can compensate an input-referred DC offset (such as system offset) up to 117% of the selected full-scale range. These three differential channels may also be configured to operate as five pseudo-differential input channels. Two additional, fully differential system-calibration channels are provided for gain and offset error correction. External access is provided to the multiplexer (mux) output to facilitate additional signal processing.
The MAX1400 can be configured to scan all signal inputs sequentially and provide the results through the serial interface with minimum communications overhead. When used with a 2.4576MHz or 1.024MHz master clock, the digital decimation filter can be programmed to produce zeros in its frequency response at the line frequency and associated harmonics, ensuring excellent line rejection without the need for further post-filtering.
The MAX1400 comes in a 28-pin SSOP package.
- MAX5443 - +3V/+5V、串行输入、电压输出、16位DAC
- MAX15021 - 双通道、4A/2A、4MHz、降压型DC-DC调节器,提供跟踪/排序功能
- MAX4904 - 低RON、双路SPST/单路SPDT、无喀嗒声切换开关,可处理负信号
- MAX14841E - 40Mbps、+3.3V、RS-485半双工收发器
- MAX5803 - 超小尺寸、单通道、8/10/12位缓冲输出DAC,内置基准和I2C接口
- MAX15013|MAX15013A|MAX15013B - 175V/2A、高速、半桥MOSFET驱动器
- MAX708R - 监视+3V电压、低成本、微处理器监控电路
- MAX5889 - 12位、600Msps、高动态性能、双路DAC,LVDS输入
- 71M6542FT - 电表IC
- MAX5713 - 四通道、超小尺寸8/10/12位缓冲输出DAC,内置基准和SPI接口



