MAX15096|MAX15096A|MAX15096D是Maxim美信半导体公司的一款热插拔和电源开关产品，MAX15096|MAX15096A|MAX15096D是2.7V to 18V, 6A Integrated Hot-Swap/Electronic Circuit Breaker，本站介绍了MAX15096|MAX15096A|MAX15096D的封装应用图解、特点和优点、功能等，并给出了与MAX15096|MAX15096A|MAX15096D相关的Maxim元器件型号供参考。
MAX15096|MAX15096A|MAX15096D - 2.7V to 18V, 6A Integrated Hot-Swap/Electronic Circuit Breaker - 热插拔和电源开关 - 2.7V-18V Input, Smallest 6A Hot-Swap Solution with Only 12mΩ RDSON and 10% Circuit Breaker Threshold Accuracy - 美信半导体
The MAX15096/MAX15096A/MAX15096D ICs are integrated solutions for hot-swap applications requiring the safe insertion and removal of circuit line cards from a live backplane. They can also be used as electronics circuit breaker for hard drive and solid-state drive and fans. The devices integrate a hot-swap controller, 12mΩ (typ) power MOSFET, and an electronic circuit-breaker protection in a single package.
The devices are designed for protection of 2.7V to 18V supply voltages. These devices implement a foldback current limit during startup to control inrush current, lowering di/dt and keeping the MOSFET operating under safe operating area (SOA) conditions. After the startup cycle is complete, on-chip comparators provide VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, and immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The devices are factory calibrated to deliver accurate overcurrent protection with ±10% accuracy. During a fault condition, PG goes low and the devices latch off (MAX15096) or automatic retry (MAX15096A);the output could also be discharged after a fault event (MAX15096D).
The devices feature an IN-to-OUT short-circuit detection before startup. The devices provide a power-MOSFET GATE pin to program the slew rate during startup by adding an external capacitor. The devices have an undervoltage/overvoltage input pin (UVOV) that can detect an undervoltage/overvoltage fault and disconnect the IN from the OUT. Additional features include internal overtemperature protection and a power-good output (PG).
The devices are available in a 16-bump, 2mm x 2mm wafer-level package (WLP) and are rated over the -40°C to +105°C extended temperature range.
