

- MAX32625PICO# - 开发板,套件,编程器 > 评估板 > 嵌入式 MCU、DSP 评估板
- MAX160EPN+ - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- DS3991Z+T&R/HB - 集成电路(IC) > 电源管理(PMIC) > 照明,镇流器控制器
- MAX6034AEXR21+T - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- MAXREFDES108# - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- MAX696EPE+ - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX629ESA+ - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX15068ATP+TG2Z - 集成电路(IC) > 电源管理(PMIC) > 热插拔控制器
- MAX8868EUK28+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- MAX16993AGJA/VY+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- DS1090U-1 - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- MAX6338PUB+ - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX121CPE+ - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX77650AEWV+ - 集成电路(IC) > 电源管理(PMIC) > 电池充电器
- MAX967ESA-T - 集成电路(IC) > 线性 > 比较器
- MAX489CPD+ - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- DS1836CS-10 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX20457ATIE/VY+ - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX4660EUA+T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX6388XS45D7-T - 集成电路(IC) > 电源管理(PMIC) > 监控器



MAX1758 - 独立的开关模式Li+电池充电器,内置28V开关
MAX1758是Maxim美信半导体公司的一款电池管理产品,MAX1758是独立的开关模式Li+电池充电器,内置28V开关,本站介绍了MAX1758的封装应用图解、特点和优点、功能等,并给出了与MAX1758相关的Maxim元器件型号供参考。
MAX1758 - 独立的开关模式Li+电池充电器,内置28V开关 - 电池管理 - Maxim美信半导体高性能芯片品质 - 美信半导体
The MAX1758 is a switch-mode lithium-ion (Li+) battery charger that charges one-to-four cells. It provides a regulated charging current accurate to ±10% and a regulated voltage with only a ±0.8% total voltage error at the battery terminals. The internal high-side switch delivers a programmable current of up to 1.5A to charge the battery. The built-in safety timer automatically terminates charging once the adjustable time limit has been reached.
The MAX1758 regulates the voltage set point and charging current using two loops that work together to transition smoothly between voltage and current regulation. An additional control loop monitors the total current drawn from the input source (charging + system), and automatically reduces battery-charging current, preventing overload of the input supply and allowing the use of a low-cost wall adapter.
The per-cell battery regulation voltage is set between 4.0V and 4.4V using standard 1% resistors. The number of cells is set from 1-to-4 by pin strapping. Battery temperature is monitored by an external thermistor to prevent charging outside the acceptable temperature range.
The MAX1758 is available in a space-saving 28-pin SSOP package. Use the MAX1758EVKIT to help reduce design time. For a stand-alone charger with a 14V switch, refer to the MAX1757 data sheet. For a charger controller capable of up to 4A charging current, refer to the MAX1737 data sheet.
- MAX1437B - 八路、12位、50Msps、1.8V ADC,串行LVDS输出
- MAX9041 - 微功耗、单电源、UCSP/SOT23封装的比较器 + 精密电压基准IC
- MAX4885E - 超低电容VGA开关,具有±15kV ESD保护
- MAX1776 - 24V、600mA内置开关、100%占空比、降压型转换器
- MAX1225 - 1.5Msps、单电源、低功耗、真差分、12位ADC
- MAX7358 - 1至8路I²C总线开关/复用器,带有总线闭锁检测、隔离和报警指示
- MAX7032 - 低成本、基于晶振的可编程ASK/FSK收发器,带有N分频PLL
- 71M6531D - 电表IC
- MAX9820 - 可由外部调节增益的DirectDrive耳机放大器
- MAX3235E - ±15kV ESD保护、1µA、250kbps、3.3V/5V、双路RS-232收发器,内置电容



