

- ICL7652CWE - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MAX7624CSE - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- MAX3226EEAE+ - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX5153BCEE - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- MAX13237EETE+ - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX3471EUA+ - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX4969CTO+T - 集成电路(IC) > 接口 > 信号缓冲器、中继器、分离器
- MAX6865UK30D6L+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX9651AUA+T - 集成电路(IC) > 线性 > 放大器 > 视频放大器和模块
- DS1090U-32+T - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- TMC-UPS-2A24V-A-EVAL - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- MAX6793TPVD0+ - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX1400EAI+ - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX962EUA - 集成电路(IC) > 线性 > 比较器
- MAX9272AGTM/V+T - 集成电路(IC) > 接口 > 串行器,解串器
- MAX22192ARC+ - 集成电路(IC) > 接口 > 传感器和检测器接口
- MAX3634ETM - 集成电路(IC) > 时钟/定时 > 应用特定时钟/定时
- ADPL62092UK16AKA+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX4250AAUK+T - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MAX1046BETX+ - 集成电路(IC) > 数据采集 > ADC/DAC - 特殊用途



MAX1881 - 四路输出、TFT LCD DC-DC转换器,带有缓冲器
MAX1881是Maxim美信半导体公司的一款DC-DC开关调节器产品,MAX1881是四路输出、TFT LCD DC-DC转换器,带有缓冲器,本站介绍了MAX1881的封装应用图解、特点和优点、功能等,并给出了与MAX1881相关的Maxim元器件型号供参考。
MAX1881 - 四路输出、TFT LCD DC-DC转换器,带有缓冲器 - DC-DC开关调节器 - Maxim美信半导体高性能芯片品质 - 美信半导体
The MAX1778/MAX1880MAX1885 multiple-output DC-DC converters provide the regulated voltages required by active matrix thin-film transistor (TFT) liquid crystal displays (LCD) in a low-profile TSSOP package. One high-power step-up converter and two low-power charge pumps convert the 2.7V to 5.5V input voltage into three independent output voltages. A built-in linear regulator and VCOM buffer complete the power-supply requirements.
The main step-up converter accurately generates an externally set output voltage up to 13V that can supply the display's row/column drivers. The converter's high switching frequency and current-mode PWM architecture provide fast transient response and allow the use of small low-profile inductors and ceramic capacitors. The low-power BiCMOS control circuitry and internal 14V switch (0.35≈ N-channel MOSFET) enable efficiencies up to 91%.
The dual low-power charge pumps (MAX1778/ MAX1880/MAX1881/MAX1882 only) independently regulate one positive output (VPOS) and one negative output (VNEG). These low-power outputs use external diode and capacitor stages (as many stages as required) to regulate output voltages up to +40V and -40V. A unique control scheme minimizes output ripple as well as capacitor sizes for both charge pumps.
A resistor-programmable, 40mA, low-dropout linear regulator (MAX1778/MAX1881/MAX1883/MAX1884 only) provides preregulation or postregulation for any of the supplies. For higher current applications, an external transistor can be added. Additionally, the VCOM buffer provides a high current output that is ideal for driving the capacitive backplane of TFT LCD panels. The VCOM buffer's output voltage is preset with an internal 50% resistive-divider or can be externally adjusted for other voltages.
The MAX1778/MAX1880MAX1885 are protected against output undervoltage and thermal overload conditions by a latched fault detection circuit that shuts down the device. All devices are available in the ultra-thin TSSOP package (1.1mm max height).
- DS1347 - 小电流、SPI兼容实时时钟
- MAX8513 - 宽输入范围、高频、三输出电源,带有电压监测器和上电复位
- MAX9390 - 任意逻辑至LVDS、双路、2 x 2交叉点开关
- DS4150 - DS4-XO系列时钟振荡器
- MAX6653 - 温度监测器和PWM风扇控制器
- MAX3040 - ±10kV ESD保护、四路、5V、RS-485/RS-422发送器
- MAX4194 - 微功耗、单电源、满摆幅、精密仪表放大器
- MAX5217 - 14/16位低功耗、满摆幅缓冲输出DAC,带有I²C 接口
- DG444 - 改进的四路、SPST模拟开关
- DS1873 - 具有模拟LDD接口的SFP+控制器



