The MAX4240–MAX4244 family of micropower op amps operate from a single +1.8V to +5.5V supply or dual ±0.9V to ±2.75V supplies and have Beyond-the-Rails™ inputs and rail-to-rail output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current per amplifier. The MAX4241/MAX4243 have a low-power shutdown mode that reduces supply current to less than 1µA and forces the output into a high-impedance state. Although the minimum operating voltage is specified at +1.8V, these devices typically operate down to +1.5V. The combination of ultra-low-voltage operation, Beyond-the-Rails inputs, rail-to-rail outputs, and ultra-low power consumption makes these devices ideal for any portable/two-cell battery-powered system.

These amplifiers have an input common-mode range that extends 200mV beyond each rail, and their outputs typically swing to within 9mV of the rails with a 100kΩ load. Beyond-the-Rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. The combination of low input offset voltage, low input bias current, and high open-loop gain makes them suitable for low-power/low-voltage precision applications.

The MAX4240 is offered in a space-saving 5-pin SOT23 package. All specifications are guaranteed over the -40°C to +85°C extended temperature range.

• MAX13413E - RS-485收发器，集成低压差稳压器和AutoDirection控制
• MAX819L|MAX819M - +5V微处理器监控电路
• DS1817 - 高有效、3.3V、经济型复位芯片
• MAX4517 - 双电源、低导通电阻、SPST、CMOS模拟开关
• MAX4071 - 双向、高边、电流检测放大器，内置电压基准
• DS1831C - 3.3V/2.5V、多电源MicroMonitor
• MAX6320 - 5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX1294 - 420ksps、+5V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX8606 - USB/AC适配器、线性Li+电池充电器，集成50mΩ电池开关，TDFN封装
• MAX6848 - 低功耗、可调节的电池监测器，带有滞回和集成的微处理器复位电路