

- MAX620EWN+ - 集成电路(IC) > 电源管理(PMIC) > 栅极驱动器
- MAX4761EWX+T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX489EPD - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX20480DATEJ/VY+ - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX3107ETG/V+T - 集成电路(IC) > 接口 > UART(通用异步接收器发送器)
- MAX4502EUK-T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX4234ASD - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MAX6315US28D4+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX5420CEUA+ - 集成电路(IC) > 数据采集 > 数字电位计
- ICL7663ACPA+ - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DG409CUE+ - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- DS1831AS - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX6143AASA10+T - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- DS1687-3IND+ - 集成电路(IC) > 时钟/定时 > 实时时钟
- MAX1456CWI+T - 集成电路(IC) > 接口 > 传感器和检测器接口
- DS1821S+T&R - 传感器,变送器 > 温度传感器 > 模拟和数字输出
- MAX20096EVSYS# - 开发板,套件,编程器 > 评估板 > LED 驱动器评估板
- MAX20330EWA+ - 集成电路(IC) > 专用 IC
- MAX705CUA+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX1832EUT+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器



MAX4273 - 3V至12V、限流型、热插拔控制器,带有自动重试以及DualSpeed/BiLevel故障保护
MAX4273是Maxim美信半导体公司的一款热插拔和电源开关产品,MAX4273是3V至12V、限流型、热插拔控制器,带有自动重试以及DualSpeed/BiLevel故障保护,本站介绍了MAX4273的封装应用图解、特点和优点、功能等,并给出了与MAX4273相关的Maxim元器件型号供参考。
MAX4273 - 3V至12V、限流型、热插拔控制器,带有自动重试以及DualSpeed/BiLevel故障保护 - 热插拔和电源开关 - 3V至12V热插拔控制器,提供闭锁保护或自动重试功能,8引脚SO封装 - 美信半导体
The MAX4271/MAX4272/MAX4273 comprise a complete family of integrated 3V to 12V hot-swap controllers. They allow the safe insertion and removal of circuit cards into live backplanes.
The discharged filter capacitors of the circuit card provide a low impedance to the live backplane. High in-rush currents from the backplane to the circuit card can burn up connectors and components, or momentarily collapse the backplane power supply leading to a system reset. This family of hot-swap controllers prevents such problems by regulating the current to a preset limit when the board is plugged in, allowing the system to stabilize safely. After the startup cycle is completed, two on-chip comparators provide DualSpeed/BiLevel™ protection against short circuits, load glitches, and overcurrent conditions. In the event of a fault condition, the load is disconnected. Fault recovery is handled by unlatching (MAX4271), autoretry (MAX4272), or programmed(MAX4273) methods.
The MAX4271 family includes many integrated features that reduce component count and design time. An on-board charge pump provides the gate drive for a low-cost, external n-FET. Integrated features like startup current regulation and current glitch protection eliminate external timing resistors and capacitors. Also featured are an open-drain status output to indicate a fault condition, and an adjustable overcurrent response time.
The MAX4271 (latched fault protection) and MAX4272 (autoretry fault protection) come in 8-pin SO packages. The MAX4273 (full function) comes in the space-saving 16-pin QSOP package and 16-pin SO package. All parts are specified across the extended temperature range, and have an absolute maximum rating of 15V to provide extra protection against inductive kickback during board removal.
- MAX9616 - 低功耗单/双通道、满摆幅输入/输出运算放大器
- MAX15492 - 单相同步MOSFET驱动器,具有超低功耗待机
- MAX3430 - ±80V故障保护、失效保护、1/4单元负载、+3.3V、RS-485收发器
- MAX7322 - I²C端口扩展器,提供4路推挽输出和4路输入
- MAX6858 - 纳安级功耗的微处理器监控电路,带有手动复位及看门狗定时器
- MAX8630Y - 125mA 1倍/1.5倍电荷泵,可驱动5支白光LED,3mm x 3mm TDFN封装
- MAX5946A|MAX5946L - 双通道PCI Express、热插拔控制器
- MAX7060 - 280MHz至450MHz可编程ASK/FSK发送器
- DS3234 - 超高精度、SPI总线RTC,集成晶体和SRAM
- MAX44291 - 36V、单通道、低噪声放大器,最大失调漂移为0.5μV/°C



