The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (COM_) pins are not symmetrical. The fault protection feature allows for the analog input to go beyond the plus or minus supplies without the device drawing excessive amounts of current from the analog inputs. When the analog inputs are driven beyond the supply rails when the switch is on, it will sense a fault and turn itself off and the analog switch output will be clamped to the same polarity supply as the input signal and will not go beyond the supply rails. This feature protects any electronic circuitry connected to the output from excessive voltages present on the analog inputs.

The MAX4711/MAX4712/MAX4713 are quad, singlepole/single-throw (SPST) analog switches. The MAX4711 has four normally closed switches (NC), the MAX4712 has four normally open switches (NO), and the MAX4713 has two NO and two NC switches. Switching times are less than 125ns for tON, and less than 80ns for tOFF. These switches operate from a single +2.7V to +11V supply or from dual ±2.7V to ±5.5V supplies. All digital inputs have +0.8V to +2.4V logic thresholds, ensuring both TTL and CMOS logic compatibility when using ±4.5V to ±5.5V or single +4.5V to +11V supplies.

• MAX1267 - 265ksps、+3V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX6061A|MAX6061B - 高精度、微功耗、低压差、高输出电流、SOT23封装电压基准
• MAX9024 - 微功耗、超小型、单/双/四路、单电源比较器
• 78M6612 - 单相、双输出功率和电能测量IC
• MAX3229 - +2.5V至+5.5V、RS-232收发器，UCSP封装
• DS8007 - 多协议双智能卡接口
• MAX3681 - +3.3V、622Mbps、SDH/SONET 1:4解串器，LVDS输出
• MAX9003 - 低功耗、高速、单电源运算放大器比较器电压基准IC
• MAX1241 - +2.7V、低功耗、12位串行ADC，8引脚SO封装
• DS1868B - 2通道数字电位器