MAX541 - +5V、串行输入、电压输出16位DAC

MAX541是Maxim美信半导体公司的一款数据转换器和采样-保持电路产品，MAX541是+5V、串行输入、电压输出16位DAC，本站介绍了MAX541的封装应用图解、特点和优点、功能等，并给出了与MAX541相关的Maxim元器件型号供参考。

MAX541 - +5V、串行输入、电压输出16位DAC - 数据转换器和采样-保持电路 - 单通道、串行、电压输出DAC，采用SO封装 - 美信半导体

产品概述

The MAX541/MAX542 are serial-input, voltage-output, 16-bit digital-to-analog converters (DACs) that operate from a single +5V supply. They provide 16-bit performance (±1LSB INL and DNL) over temperature without any adjustments. The DAC output is unbuffered, resulting in a low supply current of 0.3mA and a low offset error of 1LSB.

The DAC output range is 0V to VREF. For bipolar operation, matched scaling resistors are provided in the MAX542 for use with an external precision op amp (such as the MAX400), generating a ±VREF output swing. The MAX542 also includes Kelvin-sense connections for the reference and analog ground pins to reduce layout sensitivity.A 16-bit serial word is used to load data into the DAC latch. The 10MHz, 3-wire serial interface is compatible with SPI™/QSPI™/MICROWIRE™, and it also interfaces directly with optocouplers for applications requiring isolation. A power-on reset circuit clears the DAC output to 0V (unipolar mode) when power is initially applied.The MAX541 is available in 8-pin plastic DIP and SO packages. The MAX542 is available in 14-pin plastic DIP and SO packages.

关键特性

以下关键特性由Maxim美信半导体提供：

全16位，性能无需调节

+5V单相供电

低功耗：1.5mW

设定时间为1µs

无缓冲电压输出直接驱动60-kilohm负载

兼容SPI/QSPI/MICROWIRE串口

上电复位电路清除DAC输出至0V (单极模式)

光耦合器接口直接采用施米特触发器输入

热门应用

自动测试设备(ATE)

数据采集

高分辨率失调与增益调节

工业过程控制

下面可能是您感兴趣的美信半导体公司数据转换器和采样-保持电路元器件

Maxim(AD)|Maxim公司|Maxim美信半导体芯片授权国内Maxim代理商

Maxim公司产品现货专家，订购美信半导体公司产品不限最低起订量，Maxim（美信半导体）产品大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球Maxim代理商现货货源 - Maxim公司（已被AD亚德诺半导体收购）电子元件在线订购