The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V, or +2.5V-powered circuits. They also provide a debounced manual reset input.

These circuits assert a reset signal whenever the VCC supply voltage declines below a preset threshold or whenever manual reset is asserted. Reset remains asserted for at least 140ms after VCC has risen above the reset threshold or when manual reset is deasserted. Reset thresholds suitable for operation with a variety of supply voltages are available.

The MAX6713 has an open-drain output stage, while the MAX6711/MAX6712 have push-pull outputs. The MAX6713's open-drain active-low RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The MAX6711/MAX6713 have an active-low reset output, while the MAX6712 has an active-high reset output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 1V.

Low supply current makes the MAX6711/MAX6712/MAX6713 ideal for use in portable equipment. These devices are available in a 4-pin SC70 package.

• DS1685 - 3V/5V实时时钟
• MAX15012|MAX15012A|MAX15012B - 175V/2A、高速、半桥MOSFET驱动器
• MAX3275 - 低噪声、光纤通道互阻放大器
• MAX11211 - 18位、超低功耗、Σ-Δ ADC，具有可编程增益和GPIO
• DS1404 - iButton读取头卡座
• MAX16977 - 36V、2A、2.2MHz、超低电流降压型转换器
• DS9093S - iButton墙面安装件
• MAX9638 - 3V/5V低功耗、低噪声、CMOS、满摆幅输入/输出运算放大器
• MAX11610 - 2.7V至3.6V和4.5V至5.5V、低功耗、4/8/12通道、2线串口、10位ADC
• MAX8717 - 交叉工作、高效、双电源控制器，用于笔记本电脑