The MAX703/MAX704 microprocessor (µP) supervisory circuits reduce the complexity and number of components required for power-supply monitoring and battery control functions in µP systems. These devices significantly improve system reliability and accuracy compared to that obtained with separate ICs or discrete components.

The MAX703/MAX704 are available in 8-pin DIP and SO packages and provide four functions:

1. An active-low reset during power-up, power-down, and brownout conditions.
2. Battery-backup switching for CMOS RAM, CMOS µPs, or other low-power logic circuitry.
3. A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than +5V.
4. An active-low manual reset input.

The MAX703 and MAX704 differ only in their supply-voltage monitor levels. The MAX703 generates a reset when the supply drops below 4.65V, while the MAX704generates a reset below 4.40V.

以下关键特性由Maxim美信半导体提供：

Battery-Backup Power Switching

Precision Supply-Voltage Monitor

4.65V (MAX703)

4.40V (MAX704)

200ms Reset Pulse Width

Debounced TTL/CMOS-Compatible Manual ResetInput

200µA Quiescent Current

50nA Quiescent Current in Battery-Backup Mode

Voltage Monitor for Power-Fail or Low-BatteryWarning

8-Pin DIP and SO Packages

Guaranteed RESET-bar Assertion to VCC = 1V

计算机

控制器

精确的µP电源监控

智能仪表

• MAX843 - 低噪声、稳压型、-2V GaAsFET偏置电源
• MAX9021 - 微功耗、超小型、单/双/四路、单电源比较器
• 71M6532F - 电表IC
• MAX2552 - 波段III、IV、IX和X WCDMA Femto收发器，集成GSM监测功能
• MAX8527 - 1.425V至3.6V输入、2A、0.2V压差的LDO稳压器
• MAX14757 - 四通道、+70V SPST模拟开关
• MX7545 - CMOS、缓冲驱动12位乘法DAC
• MAX11645 - 低功耗、1/2通道、I²C、12位ADC，采用1.9mm x 2.2mm超小尺寸封装
• MAX9692 - 单/双路、超高速、ECL输出比较器，带有锁存使能端
• MAX15059 - 76V、300mW boost转换器和电流监测器，用于APD偏置