The MAX803/MAX809/MAX810 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, +3.0V, or +2.5V powered circuits.

These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least 140ms after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available.

The MAX803 has an open-drain output stage, while the MAX809/MAX810 have push-pull outputs. The MAX803's open-drain active-low RESET output requires a pullup resistor that can be connected to a voltage higher than VCC. The MAX803/MAX809 have an active-low RESET output, while the MAX810 has an active-high RESET output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 1V.

Low supply current makes the MAX803/MAX809/MAX810 ideal for use in portable equipment. The MAX803 is available in a 3-pin SC70 package, and the MAX809/MAX810 are available in 3-pin SC70 or SOT23 packages.

• MAX8881 - 12V、超低IQ、低压差线性稳压器，带有POK
• MAX6870 - EEPROM可编程、六/四路电源排序器/监控电路，带有ADC
• MAX8845Z - 28V输入、线性Li+电池充电器，提供电池检测和过压保护输出
• MAX4753 - 0.9Ω、低电压、单电源、四路SPST模拟开关
• DS1851 - 双路、温控、非易失数/模转换器
• MAX6064A|MAX6064B - 高精度、微功耗、低压差、高输出电流、SOT23封装电压基准
• MAX868 - 稳压型、可调节、-2倍压反相电荷泵
• MAX9921 - 双通道、2线霍尔传感器接口，具有诊断功能
• MAX44267 - +15V单电源、双运放，±10V输出范围
• MAX4677 - 2Ω、四路、SPST、CMOS模拟开关