he MAX9152 2 x 2 crosspoint switch is designed for applications requiring high speed, low power, and low-noise signal distribution. This device includes two LVDS/LVPECL inputs, two LVDS outputs, and two logic inputs that set the internal connections between differential inputs and outputs.

The MAX9152 can be programmed to connect any input to either or both outputs, allowing it to be used in the following configurations: 2 5 2 crosspoint switch, 2:1 mux, 1:2 demux, 1:2 splitter, or dual repeater. This flexibility makes the MAX9152 ideal for protection switching in fault-tolerant systems, loopback switching for diagnostics, fanout buffering for clock/data distribution, and signal regeneration for communication over extended distances.

Ultra-low 120psPK-PK (max) PRBS jitter ensures reliable communications in high-speed links that are highly sensitive to timing error, especially those incorporating clock-and-data recovery, or serializers and deserializers. The high-speed switching performance guarantees an 800Mbps data rate and less than 50ps (max) skew between channels.

LVDS inputs and outputs are compatible with the TIA/EIA-644 LVDS standard. The LVDS inputs are designed to also accept LVPECL signals directly, and PECL signals with an attenuation network. The LVDS outputs are designed to drive 75Ω or 100Ω loads, and feature a selectable differential output resistance to minimize reflections.

The MAX9152 is available in 16-pin TSSOP and SO packages, and consumes only 109mW while operating from a single +3.3V supply over the -40°C to +85°C temperature range.

• MAX9123 - 四路LVDS线驱动器，引脚按信号流向排列
• MAX15023 - 4.5V至28V宽输入范围、双路输出同步buck控制器
• MAX5856A - 双路、8位、300Msps DAC，带有4倍/2倍/1倍插值滤波和PLL
• MAX1974 - 尺寸最小的1A、1.4MHz降压型稳压器
• MAX14693 - 高精度、可调节功率抑制器
• MAX967 - 单/双/四路、微功耗、超低电压、满摆幅输入/输出比较器
• MAX9034 - 低成本、超小型、单/双/四路、单电源比较器
• MAX618 - 28V、PWM、升压型DC-DC转换器
• MAX31180 - 扩频晶振倍频器
• MAX1223 - 12位、多通道ADC/DAC，带有FIFO、温度传感器和GPIO端口