The MAX931–MAX934 single, dual, and quad micropower, low-voltage comparators plus an on-board 2% accurate reference feature the lowest power consumption available. These comparators draw less than 4µA supply current over temperature (MAX931), and include an internal 1.182V ±2% voltage reference, programmable hysteresis, and TTL/CMOS outputs that sink and source current.

Ideal for 3V or 5V single-supply applications, the MAX931–MAX934 operate from a single +2.5V to +11V supply (or a ±1.25V to ±5V dual supply), and each comparator's input voltage range extends from the negative supply rail to within 1.3V of the positive supply.

The MAX931–MAX934's unique output stage continuously sources as much as 40mA. And by eliminating power-supply glitches that commonly occur when comparators change logic states, the MAX931–MAX934 minimize parasitic feedback, making them easier to use.

The single MAX931 and dual MAX932/MAX933 provide a unique and simple method for adding hysteresis without feedback and complicated equations, using the HYST pin and two resistors.

For applications that require increased precision with similar power requirements, see the MAX921–MAX924 data sheet. These devices include a 1% precision reference.

• MAX5453 - 双路、256抽头、增/减控制接口数字电位器
• MAX71313L - ZON M1L/M1 Single-Phase Electricity Meter SoC
• MAX3375E - ±15kV ESD保护、1µA、16Mbps、双/四路、低电压电平转换器，UCSP封装
• MAX3799 - 1Gbps至14Gbps、SFP+多速率限幅放大器和VCSEL驱动器
• MAX127A|MAX127B - 多量程、+5V、12位DAS，带有2线串行接口
• MAX14890E - Incremental Encoder Interface for RS-422, HTL, and TTL with Digital Inputs
• DS1922E - iButton温度记录器，带有8KB数据记录存储器
• MAX4233 - 高输出驱动、10MHz、10V/µs、满摆幅输入/输出运算放大器，带有关断，SC70封装
• MAX9921 - 双通道、2线霍尔传感器接口，具有诊断功能
• MAX4353 - 低成本、+3V/+5V、620µA、200MHz、单电源运算放大器，满摆幅输出