The MAX1090/MAX1092 low-power, 10-bit analog-to-digital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. The devices operate with a single +5V analog supply and feature a VLOGIC pin that allows them to interface directly with a +2.7V to +5.5V digital supply.

Power consumption is only 10mW (VDD = VLOGIC) at a 400ksps max sampling rate. Two software-selectable power-down modes enable the MAX1090/MAX1092 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates.

Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1090 has eight input channels and the MAX1092 has four input channels (four and two input channels, respectively, when in pseudo-differential mode).

Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements.

The MAX1090/MAX1092 tri-states active-low INT when active-low CS goes high. Refer to the MAX1060/MAX1064 if tri-stating active-low INT is not desired.

The MAX1090 is available in a 28-pin QSOP package, while the MAX1092 comes in a 24-pin QSOP. For pin-compatible +3V, 10-bit versions, refer to the MAX1091/MAX1093 data sheet.

• MAX14606 - 带有反偏保护的过压保护器
• MAX260 - 可由微处理器编程的通用开关电容滤波器
• MAX3430 - ±80V故障保护、失效保护、1/4单元负载、+3.3V、RS-485收发器
• MAX4053|MAX4053A - 低电压、CMOS模拟多路复用器/开关
• MAX5541 - 低成本、+5V、串行输入、电压输出、16位DAC
• MAX6068 - 高精度、微功耗、低压差、高输出电流、SOT23封装电压基准
• MAX15103 - 3A、低压差线性稳压器，采用2.7mm x 1.6mm小尺寸封装
• MAX13085E - +5.0V、±15kV ESD保护、失效保护、热插拔、RS-485/RS-422收发器
• DS28E17 - 1-Wire?至I2C主机桥
• MAXQ7670A - 带有12位ADC、PGA、64KB闪存和CAN总线接口的微控制器