

- MAX3241ECWI+ - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX4315ESE+T - 集成电路(IC) > 线性 > 放大器 > 视频放大器和模块
- MAX195BCPE - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX5917AESE+T - 集成电路(IC) > 电源管理(PMIC) > 热插拔控制器
- MAX3088CPA+ - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX4299EUE+T - 集成电路(IC) > 音频专用
- DS89C430-MNG+ - 集成电路(IC) > 嵌入式 > 微控制器
- MAX22515AWP+T - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- DS1135LU-15+ - 集成电路(IC) > 时钟/定时 > 延迟线
- MAX20011GAFOA/VY+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- DS1804U-100+ - 集成电路(IC) > 数据采集 > 数字电位计
- DS8023-RJX+T&R - 集成电路(IC) > 接口 > 专用
- PD42-3-1670-TMCL - 电机,电磁阀,驱动器板/模块 > 电机 - AC,DC
- MAX2623EUA-T - 晶体,振荡器,谐振器 > VCO(压控振荡器)
- MAX706MJA - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX1300AEUG+T - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX4052CEE - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX14523AATA+T - 集成电路(IC) > 电源管理(PMIC) > 电流调节/管理
- MAX14900DEVBRD# - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- DS1100Z-100/T&R - 集成电路(IC) > 时钟/定时 > 延迟线



MAX1110 - +2.7V、低功耗、多通道、串行8位ADC
MAX1110是Maxim美信半导体公司的一款数据转换器和采样-保持电路产品,MAX1110是+2.7V、低功耗、多通道、串行8位ADC,本站介绍了MAX1110的封装应用图解、特点和优点、功能等,并给出了与MAX1110相关的Maxim元器件型号供参考。
MAX1110 - +2.7V、低功耗、多通道、串行8位ADC - 数据转换器和采样-保持电路 - 功耗最低的8位、4/8通道ADC,内置基准 - 美信半导体
The MAX1110/MAX1111 low-power, 8-bit, 8-channel analog-to-digital converters (ADCs) feature an internal track/hold, voltage reference, clock, and serial interface. They operate from a single 2.7V to 5.5V supply and consume only 85µA while sampling at rates up to 50ksps. The MAX1110's 8 analog inputs and the MAX1111's 4 analog inputs are software-configurable, allowing unipolar/bipolar and single-ended/differential operation.
Successive-approximation conversions are performed using either the internal clock or an external serial-interface clock. The full-scale analog input range is determined by the 2.048V internal reference, or by an externally applied reference ranging from 1V to VDD. The 4-wire serial interface is compatible with the SPI™, QSPI™, and MICROWIRE™ serial-interface standards. A serial-strobe output provides the end-of-conversion signal for interrupt-driven processors.
The MAX1110/MAX1111 have a software-programmable, 2µA automatic power-down mode to minimize power consumption. Using power-down, the supply current is reduced to 6µA at 1ksps, and only 52µA at 10ksps. Power-down can also be controlled using the active-low SHDN input pin. Accessing the serial interface automatically powers up the device.
The MAX1110 is available in a 20-pin SSOP package. The MAX1111 is available in a small 16-pin QSOP package.
- DS3903 - 三路、128抽头、非易失数字电位器
- MAX4513 - 四路、满摆幅、故障保护、SPST模拟开关
- DS1876 - 具有双LDD接口的SFP控制器
- MAX3955 - 11.32Gbps Transceiver with Dual CDRs, Digital Monitors, and DC-Coupled Laser Driver
- DS1843 - 高速采样/保持电路
- MAX5912 - -48V、Simple Swapper热插拔开关
- MAX932 - 超低功耗、低成本比较器、内置2%电压基准
- MAX1293 - 250ksps、+3V、8/4通道、12位ADC,带有+2.5V电压基准及并行接口
- MAX8573 - 高效LCD boost电路,可真正关断
- MAX5052A|MAX5052B - 电流模式PWM控制器,带有误差放大器,适用于隔离型/非隔离型电源



