The MAX1290/MAX1292 low-power, 12-bit analog-to-digital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. The devices operate with a single +5V analog supply and feature a VLOGIC pin that allows them to interface directly with a +2.7V to +5.5V digital supply.

Power consumption is only 10mW (VDD = VLOGIC) at a 400ksps max sampling rate. Two software-selectable power-down modes enable the MAX1290/MAX1292 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates.

Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1290 has eight input channels and the MAX1292 has four input channels (four and two input channels, respectively, when in pseudo-differential mode).

Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements.

The MAX1290/MAX1292 tri-states active-low INT when active-low CS goes high. Refer to MAX1262/MAX1264 if tri-stating active-low INT is not desired.

The MAX1290 is available in a 28-pin QSOP package, while the MAX1292 comes in a 24-pin QSOP. For pin-compatible +3V, 12-bit versions, refer to the MAX1291/MAX1293 data sheet.

• MAX6729 - 双/三路、超低电压、SOT23封装、微处理器监控电路
• MAX4200 - 超高速、低噪声、低功耗、SOT23封装的开环缓冲器
• MAX5500 - 低功耗、四路、12位、电压输出DAC，串行接口
• MAX6655 - 双路远端/本地温度传感器及四路电压监测器
• MAX5486 - 立体声音量控制，提供按键接口
• MAX9242 - 21位解串器，提供可编程扩频和直流平衡
• MAX6301 - +5V、低功耗、微处理器监控电路，带有可调节的复位/看门狗定时器
• MAX6416 - 低功耗、单/双电压、微处理器复位电路，可通过电容调节复位超时周期
• MAX6499 - 72V、过压保护开关/限幅控制器，外置MOSFET
• MAX378 - 8通道、高电压、故障保护多路复用器