The MAX1290/MAX1292 low-power, 12-bit analog-to-digital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. The devices operate with a single +5V analog supply and feature a VLOGIC pin that allows them to interface directly with a +2.7V to +5.5V digital supply.

Power consumption is only 10mW (VDD = VLOGIC) at a 400ksps max sampling rate. Two software-selectable power-down modes enable the MAX1290/MAX1292 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates.

Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1290 has eight input channels and the MAX1292 has four input channels (four and two input channels, respectively, when in pseudo-differential mode).

Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements.

The MAX1290/MAX1292 tri-states active-low INT when active-low CS goes high. Refer to MAX1262/MAX1264 if tri-stating active-low INT is not desired.

The MAX1290 is available in a 28-pin QSOP package, while the MAX1292 comes in a 24-pin QSOP. For pin-compatible +3V, 12-bit versions, refer to the MAX1291/MAX1293 data sheet.

• MAX280 - 五阶、零误差、巴特沃兹、开关电容低通滤波器
• MAX3041 - ±10kV ESD保护、四路、5V、RS-485/RS-422发送器
• DS3503 - NV、I²C、步进调节电位器
• MAX4460 - SOT23封装、3V/5V、单电源、满摆幅仪表放大器
• MAX1917 - 跟踪、可吸入/源出电流、同步buck控制器，用于DDR存储器及端接电源
• MAX19713 - 10位、45Msps、全双工模拟前端
• MAX876A|MAX876B - 低功耗、低漂移、+2.5V/+5V/+10V精密电压基准
• MAX6863 - 纳安级功耗的微处理器监控电路，带有手动复位及看门狗定时器
• 78M6613 - 单相交流电测量IC
• MAX14602 - USB主机充电器识别/适配器仿真