The MAX13301 combines four high-efficiency Class D amplifiers with integrated diagnostic hardware for reliable automotive audio systems, and delivers up to 80W at 10% THD+N per channel into 4Ω when operating from a 24V supply.

The internal diagnostics evaluate each channel's output impedance to check for shorts across the outputs, to the battery, or to ground. The I²C interface allows the system to query critical device parameters such as device temperature and output clipping. The device is programmable to four different I²C addresses.

The audio amplifiers feature single-ended analog inputs with a common negative input. The MAX13301 has a fixed gain of 26dB.

The Class D amplifier has 10 programmable switching frequencies between 300kHz and 750kHz.

The BTL outputs are protected against short circuits and thermal overload. The outputs can be configured as a 2-, 3-, or 4-channel amplifier. The device provides 50V load-dump protection, and is offered in the thermally enhanced, 48-pin TSSOP-EPR package operating over the -40°C to +125°C temperature range.

• MAX2209 - RF功率检测器
• DS1841 - 温度控制、NV、I²C对数电阻器
• MAX4742 - 0.8Ω、低电压、单电源、双路SPST模拟开关
• MAX15050 - 高效、4A、1MHz、降压型调节器，内置开关，采用2mm x 2mm封装
• MAX8581 - 2.5MHz/1.5MHz降压型转换器，具有60mΩ旁路开关，采用TDFN封装，用于CDMA PA供电
• MAX6445 - 微处理器复位电路，带有超长手动复位设置时间
• MAX7645 - CMOS、12位缓冲驱动乘法DAC
• MAX1110 - +2.7V、低功耗、多通道、串行8位ADC
• DS1088|DS1088L - 低成本、固定频率EconOscillator
• MAX883 - 5V/3.3V或可调、低压差、低IQ、200mA线性稳压器，具有待机模式