

- MAX1669EEE+T - 集成电路(IC) > 电源管理(PMIC) > 热管理
- MAX15026CATD+T - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- MAX6325ESA+ - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- MAX6400BS30+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX704CPA+ - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX9129EUE-T - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX708CPA+ - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX17682ATP+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX96714R-BCK-EVK# - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- DS1371U - 集成电路(IC) > 时钟/定时 > 实时时钟
- MAX3222ECUP+T - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX1947ETA25+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX991ESA+T - 集成电路(IC) > 线性 > 比较器
- MAX16929CGUI/V+T - 集成电路(IC) > 电源管理(PMIC) > 电源管理 - 专用
- MAX3391EEUD+ - 集成电路(IC) > 逻辑 > 转换器,电平移位器
- MAX17536EVKITB# - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- MAX20478BATBG/VY+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- DS1678S+ - 集成电路(IC) > 时钟/定时 > 实时时钟
- MAX1290ACEI - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX148ACAP+T - 集成电路(IC) > 数据采集 > 模数转换器(ADC)



MAX1403 - +3V、18位、低功耗、多通道、过采样(Σ-Δ) ADC
MAX1403是Maxim美信半导体公司的一款数据转换器和采样-保持电路产品,MAX1403是+3V、18位、低功耗、多通道、过采样(Σ-Δ) ADC,本站介绍了MAX1403的封装应用图解、特点和优点、功能等,并给出了与MAX1403相关的Maxim元器件型号供参考。
MAX1403 - +3V、18位、低功耗、多通道、过采样(Σ-Δ) ADC - 数据转换器和采样-保持电路 - +3V工作,具有最高线性度的18位Σ-Δ - 美信半导体
The MAX1403 18-bit, low-power, multichannel, serial-output analog-to-digital converter (ADC) features matched 200µA current sources for sensor excitation. This ADC uses a sigma-delta modulator with a digital decimation filter to achieve 16-bit accuracy. The digital filter's user-selectable decimation factor allows the conversion resolution to be reduced in exchange for a higher output data rate. True 16-bit performance is achieved at an output data rate of up to 480sps. In addition, the modulator sampling frequency may be optimized for either lowest power dissipation or highest throughput rate. The MAX1403 operates from +3V.
This device offers three fully differential input channels that may be independently programmed with a gain between +1V/V and +128V/V. Furthermore, it can compensate an input-referred DC offset up to 117% of the selected full-scale range. These three differential channels may also be configured to operate as five pseudo-differential input channels. Two additional, fully differential system-calibration channels are provided for gain and offset error correction.
The MAX1403 can be configured to sequentially scan all signal inputs and provide the results via the serial interface with minimum communications overhead. When used with a 2.4576MHz or 1.024MHz master clock, the digital decimation filter can be programmed to produce zeros in its frequency response at the line frequency and associated harmonics, ensuring excellent line rejection without the need for further postfiltering.
The MAX1403 is available in a 28-pin SSOP package.
- MAX14578AE - USB电池充电检测器
- MAX16928 - 汽车应用TFT-LCD电源,带有boost转换器和栅极驱动稳压器
- MAX31820 - 1-Wire环境温度传感器
- DG407 - 改进的16路/双8路、CMOS模拟多路复用器
- MAX6335 - 4引脚、超低电压、低功耗、微处理器复位电路,带有手动复位
- MAX1033 - 8通道和4通道、±3 x VREF多量程输入、串行14位ADC
- MAX893L - 1.2A、限流型、高边P沟道开关,带有热关断
- MAX4008 - 高精度、76V、高端电流监测,SOT23封装
- MAX3456E - ±15kV ESD保护、USB收发器
- MAX5232 - 3V/5V、10位、串行电压输出、双路DAC,内置电压基准



