

- MAX16037PLA29+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX4674EEE+ - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX8653ETI+ - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- DS3231S/T&R - 集成电路(IC) > 时钟/定时 > 实时时钟
- MAX6755UKTD0+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX5060ATI-T - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- PD42-1-1140-CANOPEN - 电机,电磁阀,驱动器板/模块 > 步进电机
- MAX9719AETE - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- MAX20040DATPA/VY+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX33045EASA+T - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX821LUS-T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX6630MUT#TG16 - 传感器,变送器 > 温度传感器 > 模拟和数字输出
- DS1100M-75+ - 集成电路(IC) > 时钟/定时 > 延迟线
- DS1007S-2/T&R - 集成电路(IC) > 时钟/定时 > 延迟线
- MAX198BCNI - 集成电路(IC) > 数据采集 > ADC/DAC - 特殊用途
- MAX4657ESA+T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX5033BASA - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX2205EBS+T10G45 - 射频和无线 > 射频检测器
- MAX2016ETI+TD - 射频和无线 > 射频检测器
- MAX156BEWI+ - 集成电路(IC) > 数据采集 > 模数转换器(ADC)



MAX1508|MAX1508Y|MAX1508Z - 线性Li+电池充电器,带有集成调整FET、热调节和ACOK,3mm x 3mm TDFN封装
MAX1508|MAX1508Y|MAX1508Z是Maxim美信半导体公司的一款电池管理产品,MAX1508|MAX1508Y|MAX1508Z是线性Li+电池充电器,带有集成调整FET、热调节和ACOK,3mm x 3mm TDFN封装,本站介绍了MAX1508|MAX1508Y|MAX1508Z的封装应用图解、特点和优点、功能等,并给出了与MAX1508|MAX1508Y|MAX1508Z相关的Maxim元器件型号供参考。
MAX1508|MAX1508Y|MAX1508Z - 线性Li+电池充电器,带有集成调整FET、热调节和ACOK,3mm x 3mm TDFN封装 - 电池管理 - Maxim美信半导体高性能芯片品质 - 美信半导体
The MAX1508 is an intelligent, stand-alone constant-current, constant-voltage (CCCV), thermally regulated linear charger for a single-cell lithium-ion (Li+) battery. The MAX1508 integrates the current-sense circuit, MOS pass element, and thermal-regulation circuitry, and also eliminates the reverse-blocking Schottky diode, to create the simplest and smallest charging solution for hand-held equipment.
The MAX1508 functions as a stand-alone charger to control the charging sequence from the prequalification state through fast-charge, top-off charge, and full-charge indication. The MAX1508Y and MAX1508Z eliminate the prequalification state to allow startup into a load without a battery.
Proprietary thermal-regulation circuitry limits the die temperature to +100°C when fast charging or while exposed to high ambient temperatures, allowing maximum charging current without damaging the IC.
The MAX1508 achieves high flexibility by providing an adjustable fast-charge current by an external resistor. Other features include the charging status (active-low CHG) of the battery, an active-low control input (active-low EN) for the MAX1508 and MAX1508Z (active-high control input for the MAX1508Y), and an active-low input power-source detection output (active-low ACOK).
The MAX1508 accepts a +4.25V to +13V supply, but disables charging when the input voltage exceeds +7V to protect against unqualified or faulty AC adapters. The MAX1508 operates over the extended temperature range (-40°C to +85°C) and is available in a compact 8-pin thermally enhanced 3mm x 3mm thin DFN package with 0.8mm height.
- MAX2551 - 波段II、V WCDMA Femtocell收发器,带有GSM监测功能
- DS2715 - NiMH电池组充电控制器
- MAX3030E - ±15kV ESD保护、3.3V、四路RS-422发送器
- MAX11335 - 500ksps、12/10位、4/8/16通道ADC,提供外部信号调理复用输入
- MAX1329 - 12/16位DAS,具有ADC、DAC、DPIO、APIO、基准、电压监测器和温度传感器
- DS1218 - 非易失控制器
- MAX5417LEVCMODU - MAX5417_、MAX5418_和MAX5419_评估板/评估系统
- MAX6361H|MAX6361L|MAX6361P - SOT23封装、低功耗微处理器监控电路,带有备用电池控制器
- MAX1953 - 低成本、高频、电流模式PWM buck控制器
- MAX4789 - 200mA/250mA/300mA限流开关



