The MAX186/MAX188 are 12-bit data-acquisition systems that combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface together with high conversion speed and ultra-low power consumption. The devices operate with a single +5V supply or dual ±5V supplies. The analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation.

The 4-wire serial interface directly connects to SPI, QSPI™ and MICROWIRE® devices without external logic. A serial strobe output allows direct connection to TMS320 family digital signal processors. The MAX186/MAX188 use either the internal clock or an external serial-interface clock to perform successive-approximation A/D conversions. The serial interface can operate beyond 4MHz when the internal clock is used.

The MAX186 has an internal 4.096V reference while the MAX188 requires an external reference. Both parts have a reference-buffer amplifier that simplifies gain trim.

The MAX186/MAX188 provide a hard-wired active-low SHDN pin and two software-selectable power-down modes. Accessing the serial interface automatically powers up the devices, and the quick turn-on time allows the MAX186/MAX188 to be shut down between every conversion. Using this technique of powering down between conversions, supply current can be cut to under 10µA at reduced sampling rates.

The MAX186/MAX188 are available in 20-pin PDIP and SO packages, and in a shrink small-outline package (SSOP), that occupies 30% less area than an 8-pin PDIP. For applications that call for a parallel interface, see the MAX180/MAX181 data sheet. For anti-aliasing filters, consult the MAX274/MAX275 data sheet.

• MAX9921 - 双通道、2线霍尔传感器接口，具有诊断功能
• MAX2045 - 高增益矢量乘法器
• MAX4995B - 50mA至600mA、可编程限流开关
• MAX14651 - USB主机适配器仿真器
• MAX3054 - ±80V故障保护/容错CAN收发器，适合于汽车应用
• MAX5024 - 65V、低静态电流、高压线性稳压器，带有微处理器复位及看门狗定时器
• MAX11619 - 10位、300ksps ADC，带有FIFO和内部基准
• MAX9174 - 670MHz、LVDS至LVDS和任意逻辑至LVDS 1:2分配器
• MAX1684 - 低噪声、14V输入、1A、PWM降压型转换器
• MAX7326 - I²C端口扩展器，提供12路推挽式输出和4路输入