The MAX194 is a 14-bit successive-approximation analog-to-digital converter (ADC) that combines high speed, high accuracy, low power consumption, and a 10µA shutdown mode. Internal calibration circuitry corrects linearity and offset errors to maintain the full rated performance over the operating temperature range without external adjustments. The capacitive-DAC architecture provides an inherent 85ksps track/hold function.

The MAX194, with an external reference (up to +5V), offers a unipolar (0V to VREF) or bipolar (-VREF to VREF) pin-selectable input range. Separate analog and digital supplies minimize digital-noise coupling.

The chip select (active-low CS) input controls the three-state serial-data output. The output can be read either during conversion as the bits are determined, or following conversion at up to 5Mbps using the serial clock (SCLK). The end-of-conversion (active-low EOC) output can be used to interrupt a processor, or can be connected directly to the convert input (active-low CONV) for continuous, full-speed conversions.

The MAX194 is available in 16-pin DIP, wide SO, and ceramic sidebraze packages. The output data format provides pin-for-pin and functional compatibility with the 16-bit MAX195 ADC.

• MAX391 - 高精度、四路、SPST模拟开关
• MAX294 - 八阶、低通、椭圆函数、开关电容滤波器
• MAX14680 - 超低导通电阻、结构紧凑的双向电池开关
• MAX4574 - 串行控制、无喀嗒声的音频/视频开关
• MAX9986 - SiGe、高线性度、815MHz至995MHz下变频混频器，带有LO缓冲器/开关
• MAX5591 - 带缓冲、快速建立、八通道、12/10/8位、电压输出DAC
• MAX4256 - UCSP封装、单电源、低噪声、低失真、满摆幅运算放大器
• MAX406 - 单、双、四路、1.2µA最大静态电流、单电源运算放大器
• MAX9234 - 热插拔、21位、直流平衡、LVDS解串器
• MAX1641 - 可调输出、开关模式电流源，内置同步整流