The MAX31820PAR ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over its entire -55°C to +125°C operating range, the device has ±2.0°C accuracy.

The device communicates over a 1-Wire® bus that, by definition, requires only one data line (and ground) for communication with a central microprocessor. In addition, the device derives power directly from the data line (“parasite power”), eliminating the need for an external power supply. Requiring so few pins enables the device to be placed in a 3-pin TO-92 package. The form factor of this package allows the device to be placed above the board and thus measure the ambient temperature of a system, as opposed to the board temperature that a surface-mount package would measure.

Each MAX31820PAR has a unique 64-bit serial code, which allows multiple MAX31820PAR devices to function on the same 1-Wire bus. Therefore, it is simple to use one microprocessor to control many devices distributed over a large area.

• MAX14548AE - 100Mbps、16通道LLT
• MAX666 - Dual Mode、5V可编程的、微功耗稳压器
• DS1818 - 3.3V、经济型复位芯片，带有手动复位按钮
• MAX4285 - +3V/+5V、250MHz、SOT23封装ADC缓冲放大器，带有高速禁止功能
• MAX12553 - 14位、65Msps、3.3V ADC
• MAX7421 - 五阶、低通、开关电容滤波器
• MAX1322 - 8/4/2通道、14位、同时采样ADC，提供±10V、±5V或0至+5V模拟输入范围
• MAX4923 - 过压保护控制器，采用外部pFET
• DS18B20-PAR - 1-Wire寄生供电数字温度计
• DS1339B - 低电流、I2C、串行实时时钟，可配合高ESR晶振工作