The MAX394 is a precision, low-voltage, quad, single-pole/double-throw (SPDT) analog switch. The four independent switches operate with bipolar supplies ranging from ±2.7V to ±8V, or with a single supply of +2.7V to+15V. The MAX394 offers low on-resistance (less than 35Ω), guaranteed to match within 2Ω between channels and to remain flat over the analog signal range (Δ4Ω max). It also offers break-before-make switching (10ns typical), with turn-off times less than 75ns and turn-on times less than 130ns. The MAX394 is ideal for portable operation since quiescent current runs less than 1µA with all inputs high or low.

This monolithic, quad switch is fabricated with Maxim's low voltage silicon-gate process. Design improvements guarantee extremely low charge injection (10pC), low power consumption (10µW), and electrostatic discharge (ESD) greater than 2000V.

Logic inputs are TTL and CMOS compatible and guaranteed over a +0.8V to +2.4V range for supply voltages up to +8V. When supplies exceed +8V, the inputs are typically +0.8V to +4V. Logic inputs and switched analog signals can range anywhere between the supply voltages without damage.

• MAX6509 - 电阻设定门限的SOT温度开关
• MAX6066A|MAX6066B - 高精度、微功耗、低压差、高输出电流、SOT23封装电压基准
• MAX6452 - 微处理器复位电路，带有超长手动复位设置时间
• MAX6320 - 5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX127A|MAX127B - 多量程、+5V、12位DAS，带有2线串行接口
• MAX8505 - 3A、1MHz、1%精度、内置开关的降压型调节器，带有电源就绪指示
• MAXQ615 - 带累加器硬件的16位MAXQ微控制器
• MAX4430 - 双电源、180MHz、16位准确度、超低失真运算放大器
• MAX2511 - 低电压IF收发器，带有限幅放大器和接收信号强度指示
• MAX2686L - 内置LDO的GPS/GNSS低噪声放大器