The MAX4240–MAX4244 family of micropower op amps operate from a single +1.8V to +5.5V supply or dual ±0.9V to ±2.75V supplies and have Beyond-the-Rails™ inputs and rail-to-rail output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current per amplifier. The MAX4241/MAX4243 have a low-power shutdown mode that reduces supply current to less than 1µA and forces the output into a high-impedance state. Although the minimum operating voltage is specified at +1.8V, these devices typically operate down to +1.5V. The combination of ultra-low-voltage operation, Beyond-the-Rails inputs, rail-to-rail outputs, and ultra-low power consumption makes these devices ideal for any portable/two-cell battery-powered system.

These amplifiers have an input common-mode range that extends 200mV beyond each rail, and their outputs typically swing to within 9mV of the rails with a 100kΩ load. Beyond-the-Rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. The combination of low input offset voltage, low input bias current, and high open-loop gain makes them suitable for low-power/low-voltage precision applications.

The MAX4240 is offered in a space-saving 5-pin SOT23 package. All specifications are guaranteed over the -40°C to +85°C extended temperature range.

• MAX5475 - 32抽头、非易失、线性变化数字电位器，SOT23封装
• MAX208E - ±15kV ESD保护、+5V RS-232收发器
• MAX3302E - USB On-the-Go收发器与电荷泵
• MAX11166 - 16位、500ksps/250ksps、内置基准的±5V SAR ADC，TDFN封装
• MAX2205 - RF功率检测器，UCSP封装
• MAX9913 - 200kHz、4µA、满摆幅输入/输出运算放大器，带有关断
• MAX3863 - 2.7Gbps激光驱动器，带有调制补偿
• MAX6444 - 微处理器复位电路，带有超长手动复位设置时间
• MXD1818 - 低功耗、微处理器复位电路，3引脚SC70/SOT23封装
• MAX691 - 微处理器监控电路