The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V, or +2.5V-powered circuits. They also provide a debounced manual reset input.

These circuits assert a reset signal whenever the VCC supply voltage declines below a preset threshold or whenever manual reset is asserted. Reset remains asserted for at least 140ms after VCC has risen above the reset threshold or when manual reset is deasserted. Reset thresholds suitable for operation with a variety of supply voltages are available.

The MAX6713 has an open-drain output stage, while the MAX6711/MAX6712 have push-pull outputs. The MAX6713's open-drain active-low RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The MAX6711/MAX6713 have an active-low reset output, while the MAX6712 has an active-high reset output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 1V.

Low supply current makes the MAX6711/MAX6712/MAX6713 ideal for use in portable equipment. These devices are available in a 4-pin SC70 package.

• MAX11637 - 12位、300ksps ADC，带有差分采样/保持和内部基准
• MAX1845 - 双路、高效率、降压型控制器，带有精确限流
• DS12885 - 实时时钟
• MAX4583L - 低电压、CMOS模拟多路复用器/开关
• MAX13175E - 多协议、引脚可设置数据接口芯片组
• MAX1470 - 315MHz、低功耗、+3V、超外差接收器
• LM4050|LM4050A|LM4050B|LM4050C - 50ppm/°C、高精度、微功耗并联型电压基准，提供多种反向击穿电压
• MAX908 - 双/四/单路、高速、超低功耗、单电源TTL比较器
• MAX5183 - 双路、10位、40MHz、电流/电压输出、同时刷新DAC
• MAX7401 - 八阶、低通、贝塞尔、开关电容滤波器