The MAX803/MAX809/MAX810 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, +3.0V, or +2.5V powered circuits.

These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least 140ms after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available.

The MAX803 has an open-drain output stage, while the MAX809/MAX810 have push-pull outputs. The MAX803's open-drain active-low RESET output requires a pullup resistor that can be connected to a voltage higher than VCC. The MAX803/MAX809 have an active-low RESET output, while the MAX810 has an active-high RESET output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 1V.

Low supply current makes the MAX803/MAX809/MAX810 ideal for use in portable equipment. The MAX803 is available in a 3-pin SC70 package, and the MAX809/MAX810 are available in 3-pin SC70 or SOT23 packages.

• MAX14571 - 高精度、可调节过压和过流保护器
• MAX1852 - SC70封装、反相电荷泵，带有关断
• MAX1681 - 125mA、频率可选、开关电容电压变换器
• MAX4016 - 低成本、高速、单电源运算放大器，满摆幅输出
• MAX6344 - 6引脚、微处理器复位电路，带有电源失效比较器
• MAX5441 - +3V/+5V、串行输入、电压输出、16位DAC
• MAX16990 - 36V、2.5MHz汽车级Boost/SEPIC控制器
• DS1267B - 双通道数字电位器
• MAX4466 - 低成本、微功耗、SC70/SOT23-8封装、麦克风前置放大器，可完全关断
• MAX1904 - 500kHz、多输出、低噪声、电源控制器，用于笔记本电脑