The MAX951–MAX954 feature combinations of a micropower operational amplifier, comparator, and reference in an 8-pin package. In the MAX951 and MAX952, the comparator's inverting input is connected to an internal 1.2V ±2% bandgap reference. The MAX953 and MAX954 are offered without an internal reference. The MAX951/MAX952 operate from a single 2.7V to 7V supply with a typical supply current of 7µA, while the MAX953/MAX954 operate from 2.4V to 7V with a 5µA typical supply current. Both the op amp and comparator feature a common-mode input voltage range that extends from the negative supply rail to within 1.6V of the positive rail, as well as output stages that swing rail-to-rail.

The op amps in the MAX951/MAX953 are internally compensated to be unity-gain stable, while the op amps in the MAX952/MAX954 feature 125kHz typical bandwidth, 66V/ms slew rate, and stability for gains of 10V/V or greater. These op amps have a unique output stage that enables them to operate with an ultra-low supply current while maintaining linearity under loaded conditions. In addition, they have been designed to exhibit good DC characteristics over their entire operating temperature range, minimizing input-referred errors.

The comparator output stage of these devices continuously sources as much as 40mA. The comparators eliminate power-supply glitches that commonly occur when changing logic states, minimizing parasitic feedback and making the devices easier to use. In addition, they contain ±3mV internal hysteresis to ensure clean output switching, even with slow-moving input signals.

• DS1110 - 10抽头硅延迟线
• MAX1289 - 150ksps、12位、双通道单端及单通道真差分ADC
• MAX6518 - 低成本、2.7V至5.5V、模拟温度传感器开关，SOT23封装
• MAX8512 - 超低噪声、高PSRR、低压差、120mA线性稳压器
• MAX8881 - 12V、超低IQ、低压差线性稳压器，带有POK
• DS1873 - 具有模拟LDD接口的SFP+控制器
• MAX5895 - 16位、500Msps、插值与调制、双路DAC，CMOS输入
• MAX6729A - 双/三路、超低电压、SOT23封装、微处理器监控电路
• MAX6706|MAX6706A - 低电压、SOT23封装、微处理器监控电路，带有电源失效检测输入/输出、手动复位及看门狗定时器
• MAX1734 - 低电压、降压型DC-DC转换器，SOT23封装