Maxim(美信半导体)| Maxim产品型号搜索
当前位置:美信半导体 > > 美信芯片 >> MAX77818
MAX77818 - 典型电路框图:
Maxim产品 - MAX77818介绍
MAX77818 - Dual Input, Power Path, 3A Switching Mode Charger with Fuel Gauge

MAX77818是Maxim美信半导体公司的一款电池管理产品,MAX77818是Dual Input, Power Path, 3A Switching Mode Charger with Fuel Gauge,本站介绍了MAX77818的封装应用图解、特点和优点、功能等,并给出了与MAX77818相关的Maxim元器件型号供参考。

MAX77818 - Dual Input, Power Path, 3A Switching Mode Charger with Fuel Gauge - 电池管理 - Industry's Highest Efficiency Switching Mode Charger in a Smaller Solution Size in 3.87mm x 3.61mm WLP - 美信半导体


The MAX77818 is a high-performance companion PMIC for the latest smartphones and tablet computers. The PMIC includes a dual input, smart power path 3.0A switch mode charger with reverse boost capability and adapter input protection up to 16VDC withstand, proprietary ModelGauge ™ (mg5) fuel gauge technology.

The switch mode battery charger’s operating frequency is 4MHz and includes integrated, low-loss switches to provide the industry’s smallest L/C size, lowest heat, and fastest battery charging programmable up to 3.0A. The charger has two inputs that accept adapter/USB (CHIN) and/or wireless type inputs (WCIN). The wireless input can simultaneously charge the battery while powering USB-OTG type accessories. The USB-OTG output provides true-load disconnect and is protected by an adjustable output current limit.

The battery charger includes smart power path and I²C adjustable settings to accommodate a wide range of battery sizes and system loads. When external power is applied from either input, battery charging is enabled. With a valid input power source (adapter or wireless charger), the BYP pin voltage is equal to the input voltage minus resistive voltage drop. During battery-only reverse boost operation, the BYP output can be regulated with the reverse boost feature and provides up to 5V at 1.5A and requires no additional inductor, allowing the MAX77818 to power USB OTG accessories.

The switching charger is designed with a special CC, CV, and die temperature regulation algorithm. ModelGauge (mg5) provides accurate battery fuel gauging without calibration and operates with extremely low battery current.

The safeout LDO drive system USB interface devices.

The MAX77818 features a I²C revision 3.0-compatible serial interface that comprises a bidirectional serial data line (SDA) and a serial clock line (SCL).

  • 以下关键特性由Maxim美信半导体提供:
  • Dual Input Switchmode Battery Charger
  • Adapter/USB Input
  • Up to 13.4V Adapter Charging
  • Up to 4.0A Rated, Input Current Protection(Programmable)
  • Wireless Charging Input
  • Up to 5.9V Wireless Charging
  • Up to 1.26A, Input Current Protection(Programmable)
  • Support USB-OTG Accessories
  • Battery Charge Current, Up to 3.0A
  • No Sense Resistor
  • CC, CV, and Die Temperature Control
  • Integrated Battery True-Disconnect FET
  • RDS(ON) = 12.8mΩ
  • Rated Up to 4.5ARMS, Discharge Current Limit (Programmable)
  • Reverse Boost Capability
  • Supports USB-OTG Accessories
  • Up to 5.1V/1.5A
  • Adjustable OCP
  • ModelGauge (mg5) Battery Fuel Gauge
  • ±1% SOC Accuracy, No Calibration Cycles, Very Low IQ
  • Time-to-Empty and Time-to-Full Prediction
  • Two Safeout LDOs
  • I²C Serial Interface
  • 72-Bump. 3.867mm x 3.608mm WLP with 0.4mm Pitch
  • 热门应用
  • 其它手持设备
  • null
  • 下面可能是您感兴趣的美信半导体公司电池管理元器件
  • MAX17552 - 60V、100mA、超小尺寸、高效率、 同步降压型DC-DC转换器,空载耗流为22μA
  • MAX5704 - 超小尺寸、单通道、8/10/12位电压缓冲DAC,内置基准和SPI接口
  • MAX16027 - 双/三/四电压、电容调节、排序/监控电路
  • MAX4582L - 低电压、CMOS模拟多路复用器/开关
  • MAX4419 - 低功耗、+3V/+5V、400MHz单电源运算放大器,满摆幅输出
  • MAX2171 - 直接变频至低IF的调谐器,用于数字音频广播
  • MAX16919 - 500mA–3A汽车应用高速USB保护器,提供USB主机充电器端口检测
  • MAX1154 - 独立的10通道、10位系统监测器,内置温度传感器和VDD检测器
  • MAX9879 - 立体声D类音频子系统,具有DirectDrive耳机放大器
  • MAX4583L - 低电压、CMOS模拟多路复用器/开关
  • 节约时间成本,提高采购效率,Maxim官网授权代理
    寻找全球Maxim代理商现货货源 - Maxim公司(美信半导体)电子元件在线订购