

- MAXREFDES46# - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- MAX2442EAI+ - 射频和无线 > 射频收发器 IC
- MAX545AESD+T - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- MAX13053ESA+T - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX6323HUT46-T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX708RCPA+ - 集成电路(IC) > 电源管理(PMIC) > 监控器
- ICM7212AIQH+TD - 集成电路(IC) > 电源管理(PMIC) > 显示驱动器
- MAX1721EUT+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX4386EEUD+ - 集成电路(IC) > 线性 > 放大器 > 视频放大器和模块
- MAX1247BCPE+ - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- DS1085LZ-5+ - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- MAX20419ATGG/V+ - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX4993ELB+T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- DS1220AD-150 - 集成电路(IC) > 存储器 > 存储器
- MAX9717CEUA+T - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- MAX11162EUB+T - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX8877EUK29+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- MAX5132BEEE+ - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- MAX16826ATJ/V+T - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- MAX5871EVKIT# - 开发板,套件,编程器 > 评估板 > 数模转换器(DAC)评估板



DS2502-E64 - IEEE EUI-64节点地址芯片
DS2502-E64是Maxim美信半导体公司的一款1-Wire器件产品,DS2502-E64是IEEE EUI-64节点地址芯片,本站介绍了DS2502-E64的封装应用图解、特点和优点、功能等,并给出了与DS2502-E64相关的Maxim元器件型号供参考。
DS2502-E64 - IEEE EUI-64节点地址芯片 - 1-Wire器件 - Maxim美信半导体高性能芯片品质 - 美信半导体
The DS2502-E64 is a variant of the DS2502 1024-bit Add-Only Memory. It differs from the standard DS2502 in its custom ROM family code 89h, and the UniqueWare™ Identifier 5E7h in place of the upper 12 bits of the standard ROM serialization field. Otherwise, the electrical and logical behavior is identical to that of the DS2502. For technical details please refer to the DS2502 data sheet.
The first 32 bytes of the DS2502-E64's EPROM memory contain a globally unique 64-bit node address (EUI-64) and are write-protected. The data structure follows the conventions of UniqueWare devices using Default Data Structure (Figure 1 in the full data sheet). This format is also known as UDP (universal data packet) and is commonly used in 1-Wire® APIs. Therefore, if using one of those APIs one can call a high level function to read and verify the inverted CRC16. The UDP is defined in Application Note 114, 1-Wire File Structure, and the APIs can be found in the 1-Wire Software Development Kits.
The data record starts with a length byte (0Ch) and the 4-byte UniqueWare Project ID 00001128h. The next eight bytes contain the EUI-64 global identifier (node address) which consists of an incrementing 40-bit extension identifier and the IEEE®-assigned 24-bit company ID value 006035h. An inverted 16-bit CRC ends the data record. The remaining bytes of the 32-byte memory page remain unprogrammed. Neither the 40-bit extension identifier nor the 24-bit company ID are related to the 64-bit ROM registration number. The ROM registration number is used to provide a unique address to access the DS2502-E64 when multidropped on a 1-Wire bus.
- MAX490E - ±15kV ESD保护、限摆率、低功耗、RS-485/RS-422收发器
- DS1707 - 3.3V及5.0V MicroMonitor
- MAX6050A|MAX6050B - 高精度、低功耗、低压差、SOT23-3封装、电压基准
- MAX2657 - GPS/GNSS低噪声放大器
- MAX201 - +5V、RS-232收发器,0.1µF外部电容
- MAX1035 - 8/4通道、±VREF多量程输入、串行14位ADC
- MAX835 - 微功耗、具有锁存功能的电压监测器,SOT23-5封装
- MAX8552 - 高速、宽输入范围、单相MOSFET驱动器
- DG412F - 四路、满摆幅、故障保护、SPST模拟开关
- MAX3491E - 3.3V供电、±15kV ESD保护、12Mbps、限摆率、真RS-485/RS-422收发器



