

- MAX248CQH+D - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX1361EUB+ - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX4736ETC+T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX5086BATE+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- MAX14866UTM+T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX77827QEVKIT# - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- MAX14878AWA+T - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX174BCPI - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX5969BETE+T - 集成电路(IC) > 电源管理(PMIC) > 以太网供电(PoE)控制器
- MAX154AEAG+ - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX275ACPP+ - 集成电路(IC) > 接口 > 滤波器 - 有源
- MAX9041AEUT-T - 集成电路(IC) > 线性 > 比较器
- MAX3665EUA - 集成电路(IC) > 线性 > 放大器 > 特殊用途放大器
- MAX5982BETE+T - 集成电路(IC) > 电源管理(PMIC) > 以太网供电(PoE)控制器
- MAX9075EUK-T - 集成电路(IC) > 线性 > 比较器
- MAX9719AETE+T - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- MAX815KESA+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX535BEUA+T - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- MAX9880AETM+ - 集成电路(IC) > 接口 > 编解码器
- MAX32664GTGZ+ - 集成电路(IC) > 接口 > 传感器和检测器接口



MAX378 - 8通道、高电压、故障保护多路复用器
MAX378是Maxim美信半导体公司的一款保护器产品,MAX378是8通道、高电压、故障保护多路复用器,本站介绍了MAX378的封装应用图解、特点和优点、功能等,并给出了与MAX378相关的Maxim元器件型号供参考。
MAX378 - 8通道、高电压、故障保护多路复用器 - 保护器 - Maxim美信半导体高性能芯片品质 - 美信半导体
The MAX378 8-channel single-ended (1-of-8) multiplexer and the MAX379 4-channel differential (2-of-8) multiplexer use a series N-channel/P-channel/N-channel structure to provide significant fault protection. If the power supplies to the MAX378/MAX379 are inadvertently turned off while input voltages are still applied, all channels in the muxes are turned off, and only a few nanoamperes of leakage current will flow into the inputs. This protects not only the MAX378/MAX379 and the circuitry they drive, but also the sensors or signal sources that drive the muxes.
The series N-channel/P-channel/N-channel protection structure has two significant advantages over the simple current-limiting protection scheme of the industry's first-generation fault-protected muxes. First, the Maxim protection scheme limits fault currents to nanoamp leakage values rather than many milliamperes. This prevents damage to sensors or other sensitive signal sources. Second, the MAX378/MAX379 fault-protected muxes can withstand a continuous±60V input, unlike the first generation, which had a continuous ±35V input limitation imposed by power dissipation considerations.
All digital inputs have logic thresholds of 0.8V and 2.4V, ensuring both TTL and CMOS compatibility without requiring pull-up resistors. Break-before-make operation is guaranteed. Power dissipation is less than 2mW.
- MAX8540 - 可同步、高频、电流或电压模式PWM控制器,用于隔离电源
- MAX11160 - 16-Bit, 500ksps, +5V SAR ADC with Internal Reference in μMAX
- MAX11618 - 10位、300ksps ADC,带有FIFO和内部基准
- MAX4663 - 2.5Ω、四路、SPST、CMOS模拟开关
- MAX8891 - 高PSRR、低压差、150mA线性稳压器
- 78Q2120C - 10/100BASE-TX收发器
- MAX17106 - 升压型调节器和带有温度补偿的高压升压转换器
- MAX4305 - 740MHz、低噪声、低失真运算放大器,SOT23-5封装
- DS2704 - 1280位EEPROM,带有SHA-1认证
- MAX5139 - 低功耗、单通道、16/12位、缓冲电压输出DAC



