The MAX4240–MAX4244 family of micropower op amps operate from a single +1.8V to +5.5V supply or dual ±0.9V to ±2.75V supplies and have Beyond-the-Rails™ inputs and rail-to-rail output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current per amplifier. The MAX4241/MAX4243 have a low-power shutdown mode that reduces supply current to less than 1µA and forces the output into a high-impedance state. Although the minimum operating voltage is specified at +1.8V, these devices typically operate down to +1.5V. The combination of ultra-low-voltage operation, Beyond-the-Rails inputs, rail-to-rail outputs, and ultra-low power consumption makes these devices ideal for any portable/two-cell battery-powered system.

These amplifiers have an input common-mode range that extends 200mV beyond each rail, and their outputs typically swing to within 9mV of the rails with a 100kΩ load. Beyond-the-Rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. The combination of low input offset voltage, low input bias current, and high open-loop gain makes them suitable for low-power/low-voltage precision applications.

The MAX4240 is offered in a space-saving 5-pin SOT23 package. All specifications are guaranteed over the -40°C to +85°C extended temperature range.

• MAX6456 - 微处理器监控电路，带有独立的VCC复位输出和手动复位输出
• MAX4591 - 高速、单电源、四路、SPST模拟开关
• MAX239 - +5V供电、多通道RS-232驱动器/接收器
• MAX5061 - 0.6V至5.5V输出、可并联、平均电流模式DC-DC控制器
• MAX6322 - 5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX13086E - +5.0V、±15kV ESD保护、失效保护、热插拔、RS-485/RS-422收发器
• MAX14566AE - USB主机充电器识别模拟开关
• MAX4693 - 低电压、8:1复用/双路4:1复用/三路SPDT/四路SPDT开关，UCSP封装
• MAX5478 - 双路、256抽头、非易失、I²C接口、数字电位器
• MAX8536 - “或”逻辑MOSFET控制器，带有快速故障隔离功能，适用于冗余电源