

- MAX4885ETJ+ - 集成电路(IC) > 接口 > 模拟开关 - 特殊用途
- MAX6333UR23D2+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX12557ETK+D - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- DS1685QN-3+ - 集成电路(IC) > 时钟/定时 > 实时时钟
- MAX15022ATI+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性 + 开关
- MAX20499CAFOB/VY+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX6421US30+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- ICL7611ACPA - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MAX49140EVKIT# - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- TMC6300-EVAL-KIT - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- MAX6423XS26+T - 集成电路(IC) > 电源管理(PMIC) > 监控器
- MAX3224ETP+T - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- MAX5116EEE+T - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- MAX313EUE+ - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX1932ETC+T - 集成电路(IC) > 电源管理(PMIC) > 特殊用途稳压器
- MAX42406AFOA+T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- MAX4515ESA+T - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX31C80T-UGQ+T - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- MAX25249ATPK/VY+ - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性 + 开关
- MAX295EWE+ - 集成电路(IC) > 接口 > 滤波器 - 有源



MAX9693 - 单/双路、超高速、ECL输出比较器,带有锁存使能端
MAX9693是Maxim美信半导体公司的一款放大器产品,MAX9693是单/双路、超高速、ECL输出比较器,带有锁存使能端,本站介绍了MAX9693的封装应用图解、特点和优点、功能等,并给出了与MAX9693相关的Maxim元器件型号供参考。
MAX9693 - 单/双路、超高速、ECL输出比较器,带有锁存使能端 - 放大器 - 超高速、1.2ns、带有锁存使能的ECL输出比较器 - 美信半导体
The MAX9691/MAX9692/MAX9693 are ultra-fast ECL comparators capable of very short propagation delays. Their design maintains the excellent DC matching characteristics normally found only in slower comparators.
The MAX9691/MAX9692/MAX9693 have differential inputs and complementary outputs that are fully compatible with ECL-logic levels. Output current levels are capable of driving 50Ω terminated transmission lines. The ultra-fast operation makes signal processing possible at frequencies in excess of 600MHz.
The MAX9692/MAX9693 feature a latch-enable (LE) function that allows the comparator to be used in a sample-hold mode. When LE is ECL high, the comparator functions normally. When LE is driven ECL low, the outputs are forced to an unambiguous ECL-logic state, dependent on the input conditions at the time of the latch input transition. If the latch-enable function is not used on either of the two comparators, the appropriate LE input must be connected to ground; the companion active-low LE input must be connected to a high ECL logic level.
These devices are available in SO, QSOP, and tiny µMAX® packages for added space savings.- MAX14717 - 内置浪涌保护的大电流过压保护器
- MAX5814 - 四通道、超小尺寸8/10/12位缓冲输出DAC,内置基准和I²C接口
- DG303A - TTL兼容、CMOS模拟开关
- MAX11150 - 18-Bit, 500ksps, +5V SAR ADC with Internal Reference in µMAX
- MAX1281B - 400ksps/300ksps、单电源、低功耗、8通道、串行12位ADC,内置电压基准
- MAX4322 - 单/双/四路、低成本、UCSP/SOT23封装、低功耗、满摆幅输入/输出运算放大器
- MX7847 - 完备的、双路、12位乘法DAC,带有8位总线接口
- MAX5732 - 32路、16位、电压输出DAC,串行接口
- MAX1736 - SOT23封装、单节Li+电池充电器,配合限流型电源使用
- MAX4245 - 超小型、满摆幅输入/输出、带有禁止功能、单/双电源供电、低功耗运算放大器



